fasadphotography.blogg.se - How to use win500

#HOW TO USE WIN500 HOW TO#
#HOW TO USE WIN500 INSTALL#
#HOW TO USE WIN500 MANUAL#

Free-Form Memory Organization - Allocation of memory dynamically and efficiently as it is needed.

Also connect an external antenna for improved reception of distant or weak signals.

Flexible Antenna with BNC Connector - Provides reception of strong local signals.

Digital AGC - Instantly compensates for low user audio levels that are common on digital systems.

Data Cloning - Allows transfer of the programmed data to another WS1010 scanner.

Backlit Liquid Crystal Display - Easy to read and program data even in low light situations.

#HOW TO USE WIN500 MANUAL#

No cumbersome manual adjustments are required. Automatic Adaptive Digital Tracking - When monitoring P25 digital systems, instantly adapts the digital decoder to the digital modulation format of the transmitted signal, then analyzes the signal over 50 times each second and adapts to any subtle changes caused by multipath or fading.Can be used in conjunction with, or separately from, the Alert LED described above. Audible Alarms - Programmable audible alarms can be configured to sound when certain Scannable Objects are active.Eight user-defined colors can be specified from thousands of possible combinations. Alert LED - Programmable multi-color LED can be configured to illuminate or flash when certain objects are active.You can toggle each SCAN LIST off and in in this manner to scan as many as you want. After you complete uploading additional SCAN LISTS (SCAN LIST 2, SCAN LIST 3 etc….) you simply push number 2 to toggle SCAN LIST 2 to ON, number 3 to toggle SCAN LIST 3 to ON and so forth.Your scanner will reboot and you should be listening to your 1st scan list, or SCAN LIST 1 and seeing the name you put in. You will see the files on the computer and on the scanner window uploading.Click on the SCANNER tab at the top drop down menu and click on UPLOAD TO SCANNER.You should be back to the WIN500 home page. Go to the top right hand corner and click on “DONE”. You will now be back to the Talk Group List.This is what will show in your scanner window as each scanner group is scanned ”POLICE”, “EMS”, “FIRE RESCUE” etc…then assign a TARGET SCAN LIST FOR TGRP’s and an ALPHA TAG. Now you should be looking at WEB IMPORT SETTINGS.After you have selected your TALKGROUPS, you click on IMPORT THIS SYSTEM.This is the number that must remain below 32. At the bottom of the white space, you will see a block titled SELECTED TALK GROUPS.

If you're not interested in some IDs, don’t check them. (My area had 24 ID’S in the county and city police, so that’s all I picked for my first upload). BUT you are required to PICK LESS THAN 32 ID’S. You are then required to click on the “+” by “TALKGROUPS” and then pick the groups you want to scan. You will have to click on the ”+” by the “SITE” to open this folder and select a site inside this folder.

You are required to select a SITE here as well as the talk groups you want to scan.

This is where things can get messed up the first time because the “WARNING” part of the instructions were a bit vague even though it’s probably obvious to some, but for those that are brand new to scanning it just takes a little time.

After picking the system you want, you will see a white area with “SITES” and “TALKGROUP groups”.

The SYSTEM field turns blue and by clicking on it the different systems available for your county appear.

Enter info here and the STATE and then the COUNTY that you want to scan.

Enter your Radio Reference “User Name” and “Password” then click “START”.

WIN500 – “FILE” then “Web Import” then “Radio Reference” then pick either TRUNKING or CONVENTIONAL system you’re importing.

When Welcome message comes up, press 1 and then press ENT (enter).

SET MEMORY TO DEFAULT (except V-Scanner Folders) – Press 0 when turning radio on.

(If you’ve already got things messed up or not sure what’s in the scanner memory, then start here.

The WARNING note in the above site (step 7) was a bit vague and can cause some trouble, so there are some additional tips.

Use this site as a visual reference and follow the instructions below as a walk through that may help.

#HOW TO USE WIN500 HOW TO#

For a basic demonstration on how to use this software check out this video.GOOD INFO Read the Guide to WIN500 first.If this is new to you, read the Connecting scanners via USB article

#HOW TO USE WIN500 INSTALL#

Buy the programming cable and install the drivers for it.

Trunking w/ Analog Voice Only scanners, others shown in table can handle up-to Digital P25 Phase I.

This software works with the following scanners